Hobart Handler® 100 Flux-Cored Welder

Description   Broad output range of 30 -100A Allows you to weld up to 3/16 in. (4.8 mm) steel with flux-cored wire.   Four output voltage settings Four voltage ranges allow you to adjust the arc for different thicknesses.   Spool hub assembly accommodates 4- or 8-inch spools Offers you flexibility to use small or large spools of wire to better suit your welding needs.   Built-in contactor Keeps wire electrically “cold” until trigger is pulled which gives you ease of use.   Durable feed head with quick-release drive roll tension lever Positive feed with adjustable tension gives you easy access to thread new wire.   Short circuit protection Protects unit against current overload.   Self-resetting thermal overload Protects power transformer from thermal overload to provide you maximum reliability. Spec Sheet (ENG) Spec Sheet (SPA) PROCESSES Flux Cored (FCAW) Title Handler® 100 Flux-Cored Welder Material Thickness Mild Steel 18 ga (0.8 mm) – 3/16 in Weldable Metals Steel Input Voltage 110/115/120 V Input Phase 1-Phase Current Type DC Rated Output 80A @ 20% Duty Cycle Max Open Circuit Voltage 40 VDC Wire Feed Speed 90 IPM 320 IPM Weld Output CV Net Width 10 in Net Height 13.5 in Net Length 16 in Net Weight 44 lbs Warranty 3 Years   Comfortable 8 ft. (2.4 m) H100F2-8 gun with liner for .030 – .035 in. (0.8-0.9 mm) diameter wire Work cable with clamp .030 in. (0.8 mm) contact tips Power cord with plug Weld set-up chart Owner’s manual with parts list, installation, operation and maintenance guidelines.   Related